You will need to make sure that your automobile’s cigarette lighter is operational, as it may be a precious amenity for charging digital gadgets or powering different equipment. Nevertheless, if the cigarette lighter shouldn’t be working, it might be as a consequence of a blown fuse.
Changing a cigarette lighter fuse is a comparatively easy activity that may be accomplished in a couple of minutes. Nevertheless, you will need to observe the right steps to keep away from any electrical hazards. First, you will want to establish the placement of the cigarette lighter fuse in your automobile. This info can normally be present in your automobile’s proprietor’s guide.
After getting positioned the cigarette lighter fuse, you will want to take away it from the fuse field. Most fuse bins have a small device that can be utilized to take away fuses. As soon as the fuse has been eliminated, you’ll be able to examine it to see whether it is blown. A blown fuse could have a break within the wire that runs by the middle of the fuse. If the fuse is blown, you will want to exchange it with a brand new fuse of the identical amperage.
Disconnect the Battery
Supplies you will want:
- Wrench or socket set
- New fuse
Steps:
- Find the battery in your automobile. It is normally beneath the hood, however may also be within the trunk or beneath the seats.
- Disconnect the unfavorable battery terminal by loosening the bolt or nut that holds it in place. Use a wrench or socket set to do that.
- As soon as the unfavorable terminal is disconnected, you’ll be able to safely take away the fuse panel cowl. The fuse panel is normally positioned beneath the dashboard or within the glove compartment.
Take away the Fuse
As soon as you have positioned the fuse field, you will have to take away the fuse that is related to the cigarette lighter. To do that, you will want to make use of a fuse puller. A fuse puller is a small device that is designed to soundly take away fuses from their sockets. To make use of a fuse puller, merely insert the guidelines of the device into the slots on both aspect of the fuse. Then, gently pull the fuse puller in the direction of you to take away the fuse from its socket.
If you do not have a fuse puller, you may also use a pair of needle-nose pliers to take away the fuse. To do that, merely grasp the fuse with the pliers and gently pull it straight up out of its socket.
As soon as you have eliminated the fuse, you will want to examine it to see if it is blown. A blown fuse could have a damaged filament. If the fuse is blown, you will want to exchange it with a brand new fuse of the identical amperage.
Fuse Alternative and Amperage Information
| Fuse Amperage | Utility |
|---|---|
| 5 Amp | Cigarette lighter |
| 10 Amp | Energy home windows |
| 15 Amp | Radio |
| 20 Amp | Headlights |
Change the Fuse
To interchange the fuse, you will want the next instruments:
- A brand new fuse of the right amperage
- A small flathead screwdriver
After getting gathered your instruments, observe these steps:
1. Disconnect the unfavorable battery terminal
It will forestall any electrical shock when you are engaged on the fuse.
2. Find the fuse field
The fuse field is normally positioned beneath the dashboard on the driving force’s aspect. It is going to be a small black field with a lid that claims “FUSES.” Open the lid to disclose the fuses.
3. Discover the fuse for the cigarette lighter
The fuse for the cigarette lighter shall be labeled “CIGAR LIGHTER” or “POWER OUTLET.” It is going to be a small, rectangular fuse with a steel strip operating throughout the highest. The amperage of the fuse shall be printed on the highest.
4. Take away the previous fuse
Use the flathead screwdriver to softly pry the previous fuse out of the fuse field. Watch out to not contact the steel contacts on the fuse.
5. Insert the brand new fuse
Insert the brand new fuse into the fuse field in the identical orientation because the previous fuse. Guarantee that the steel contacts on the fuse are making good contact with the terminals within the fuse field.
6. Take a look at the cigarette lighter
Reconnect the unfavorable battery terminal and begin the automotive. The cigarette lighter ought to now be working. If it isn’t, test the fuse once more to guarantee that it’s put in accurately.
Reconnect the Battery
1. Open the hood and find the battery. It is normally a black field with steel terminals on high.
2. Disconnect the unfavorable terminal first. That is essential for security, because it prevents unintentional sparks.
3. Disconnect the optimistic terminal.
4. Find the fuse field. It is a small, plastic field normally discovered close to the battery.
5. Open the fuse field cowl. There must be a diagram inside that reveals you which ones fuse is for the cigarette lighter.
6. Fastidiously take away the blown fuse. You should use your fingers or needle-nose pliers.
7. Examine the brand new fuse to ensure it is the right sort and amperage.
8. Insert the brand new fuse into the empty socket. Be certain that it is seated securely.
9. Shut the fuse field cowl.
10. Reconnect the optimistic terminal.
11. Reconnect the unfavorable terminal.
12. Shut the hood.
Take a look at the Cigarette Lighter
Earlier than changing the fuse, it is important to confirm that the cigarette lighter itself is defective. Observe these steps to check it:
1. Insert a functioning cigarette lighter or digital machine into the socket.
2. Press the button to activate the lighter.
3. If the lighter does not ignite or the machine does not obtain energy, it signifies a possible problem with the fuse or wiring.
4. If the lighter ignites or the machine powers up, the cigarette lighter meeting is probably going functioning accurately, and the issue might lie elsewhere within the electrical system.
Further Troubleshooting Steps
1. Examine the cigarette lighter socket for any seen harm, corrosion, or particles.
2. If doable, use a multimeter to measure the voltage on the socket pins. A studying of 12 volts signifies that energy is current.
3. Examine the wiring harness related to the cigarette lighter for any breaks, shorts, or free connections.
4. Confirm that the fuse field is well accessible and that the cigarette lighter fuse shouldn’t be blown.
5. If all different steps fail, seek the advice of a certified electrician or automotive mechanic for additional prognosis and restore.
Take away and Examine the Fuse
Utilizing the fuse puller, fastidiously take away the previous fuse. Examine it intently to see if it is blown. A blown fuse could have a damaged filament, indicating {an electrical} fault.
Insert a New Fuse
Deal with the brand new fuse with care, avoiding touching the steel elements. Insert the brand new fuse into the fuse holder, guaranteeing it matches snugly and makes good contact.
Examine if the Fuse Blows Instantly
After changing the fuse, activate the cigarette lighter or accent. If the fuse blows instantly, there could also be a extra critical electrical problem that must be addressed.
Troubleshooting Widespread Points
No Energy to the Cigarette Lighter or Accent
If the fuse shouldn’t be blown and the cigarette lighter or accent nonetheless does not work, test the next:
- The ability supply (e.g., battery or alternator)
- The wiring connections to the cigarette lighter or accent
- The cigarette lighter or accent itself
Fuse Blows Repeatedly
If the fuse blows repeatedly, it signifies {an electrical} fault. Examine the next:
- The cigarette lighter or accent for any harm or shorts
- The wiring harness for any pinched or frayed wires
- {The electrical} system for any overloads or malfunctions
Fuse Melted or Deformed
A melted or deformed fuse signifies a big electrical fault. Instantly disconnect the battery and search skilled help to diagnose and restore the problem.
| Fuse Score | Measurement |
|---|---|
| 10 Amp | ATO |
| 15 Amp | ATE |
| 20 Amp | ATC |
Security Precautions
Earlier than you start, it is important to take the next security precautions to keep away from any potential hazards or accidents:
1. At all times park your automobile on a degree floor and have interaction the parking brake to forestall it from rolling.
2. Flip off the engine and take away the important thing from the ignition.
3. Shield your palms by sporting gloves to keep away from any cuts or burns through the course of.
4. Use a flashlight or work gentle to light up the fuse field for higher visibility.
5. Should you encounter any difficulties or uncertainties, don’t hesitate to hunt skilled help from a certified mechanic or electrician.
6. By no means try to exchange a fuse with one among a distinct amperage score, as this could result in electrical harm.
7. Change the fuse promptly to keep away from additional electrical points or hazards.
8. Eliminate the previous fuse correctly at a delegated electronics recycling middle.
9. **Double-Examine the Wiring Harness:** Earlier than changing the fuse, take a more in-depth take a look at the wiring harness connecting to the cigarette lighter. Examine it for any seen harm, similar to frayed wires or free connections. Should you discover any irregularities, it is essential to resolve these points earlier than putting in the brand new fuse. Free connections can result in brief circuits and additional electrical issues, whereas frayed wires pose a fireplace hazard. Tighten any free connections and restore broken wires utilizing electrical tape or solder, guaranteeing a safe and dependable connection.
10. Examine for Different Electrical Points: As soon as the cigarette lighter fuse has been changed, take a while to look at the opposite electrical techniques in your automobile. Activate the headlights, radio, and different equipment to make sure they’re functioning accurately. Should you encounter any issues, it might point out an underlying electrical problem that requires additional consideration. Promptly handle any electrical issues to forestall extra extreme issues from growing.
How one can Change Cigarette Lighter Fuse
1. Collect Your Instruments
You will have just a few primary instruments to exchange the cigarette lighter fuse:
- A brand new fuse that’s the identical amperage because the previous one
- A pair of needle-nose pliers
- A flashlight
2. Find the Fuse Field
The fuse field is normally positioned beneath the dashboard, on the driving force’s aspect. Seek the advice of your automobile’s proprietor’s guide for the precise location.
3. Determine the Cigarette Lighter Fuse
After getting positioned the fuse field, you might want to establish the cigarette lighter fuse. It’s normally labeled “CIGAR” or “ACC.” If you cannot discover the label, seek the advice of your automobile’s proprietor’s guide for the right fuse location.
4. Take away the Previous Fuse
Use the needle-nose pliers to softly pull the previous fuse out of its socket.
5. Insert the New Fuse
Push the brand new fuse into the socket till it clicks into place.
6. Take a look at the Cigarette Lighter
Activate the ignition and attempt to use the cigarette lighter. If it really works, you’ve efficiently changed the fuse.
Further Suggestions
7. Use the Proper Amperage Fuse
You will need to use the right amperage fuse in your cigarette lighter. Should you use a fuse that’s too low, it would blow out each time you employ the cigarette lighter. Should you use a fuse that’s too excessive, it may trigger harm to your automobile’s electrical system.
8. Examine for Different Issues
In case you have changed the fuse and the cigarette lighter nonetheless does not work, there could also be one other drawback. Examine the wiring for any free connections or harm.
9. Use a Flashlight
In case you are having hassle seeing contained in the fuse field, use a flashlight that can assist you.
10. Fuse Data
| Fuse Amperage | Fuse Sort | Fuse Location |
|---|---|---|
| 15A | Mini | Below the dashboard, driver’s aspect |
| 20A | Mini | Below the dashboard, driver’s aspect |
| 25A | Mini | Below the dashboard, driver’s aspect |
How one can Change a Cigarette Lighter Fuse
In case your automotive’s cigarette lighter is not working, the fuse might have blown. Here is a step-by-step information on the right way to substitute the fuse:
-
Find the fuse panel. It is normally positioned beneath the dashboard on the driving force’s aspect. Seek advice from your automotive’s proprietor’s guide for the precise location.
-
Discover the cigarette lighter fuse. It is normally labeled as “CIG” or “12V POWER OUTLET.” If you cannot discover it, test your proprietor’s guide for the fuse diagram.
-
Pull out the blown fuse. Use a fuse puller or needle-nose pliers to softly grasp the fuse and pull it straight out.
-
Insert a brand new fuse. Be certain that the brand new fuse is identical amperage because the blown fuse. Seek advice from your proprietor’s guide for the right amperage.
-
Take a look at the fuse. Activate the cigarette lighter and confirm that it is working.
Folks Additionally Ask
How do I do know if the cigarette lighter fuse is blown?
In case your cigarette lighter is not working, test the fuse first. A blown fuse could have a damaged wire inside.
The place can I discover the fuse diagram for my automotive?
The fuse diagram is normally positioned in your automotive’s proprietor’s guide. It reveals the placement of every fuse and its amperage.
Can I substitute the fuse myself?
Sure, changing a fuse is an easy DIY activity. Simply observe the steps outlined above.
