The Bissell Proheat Pet Turbo is a strong carpet cleaner that’s designed to take away pet hair, dander, and different allergens out of your carpets. It options a big capability tank, a strong suction motor, and quite a lot of attachments that make it straightforward to wash all forms of carpets. On this article, we’ll give you a step-by-step information on easy methods to use the Bissell Proheat Pet Turbo.
Earlier than you start utilizing the Bissell Proheat Pet Turbo, it is very important assemble the machine and put together the cleansing answer. To assemble the machine, merely connect the deal with to the bottom after which insert the tank into the bottom. To arrange the cleansing answer, combine 1 gallon of sizzling water with 4 ounces of Bissell Proheat Pet Turbo cleansing answer. As soon as the machine is assembled and the cleansing answer is ready, you might be prepared to start cleansing your carpets.
To scrub your carpets, merely fill the tank with the cleansing answer after which choose the specified cleansing mode. The Bissell Proheat Pet Turbo provides three cleansing modes: Categorical Clear, Deep Clear, and Rinse Solely. The Categorical Clear mode is designed for fast and simple cleansing, whereas the Deep Clear mode is designed for deep cleansing of closely dirty carpets. The Rinse Solely mode is used to rinse your carpets after deep cleansing. After getting chosen the specified cleansing mode, merely press the set off on the deal with to begin cleansing. The Bissell Proheat Pet Turbo will routinely dispense the cleansing answer and water onto the carpet, after which it can use its highly effective suction motor to take away the grime and particles. As you clear, be sure you overlap your strokes to make sure that all areas of the carpet are cleaned evenly.
Assembling the Bissell Proheat Pet Turbo
Unboxing the Bissell Proheat Pet Turbo
After getting unpacked the Bissell Proheat Pet Turbo from its field, you can find the next parts:
– The machine base
– The deal with meeting
– The water tank
– The detergent tank
– The cleansing head
– The pet hair instrument
Earlier than you start assembling the Bissell Proheat Pet Turbo, guarantee that all the parts are current and that none of them are broken. If any of the parts are lacking or broken, don’t use the machine and get in touch with Bissell customer support.
To assemble the Bissell Proheat Pet Turbo, comply with these steps:
1. Connect the deal with meeting to the machine base. To do that, align the deal with meeting with the machine base and push it down till it clicks into place.
2. Insert the water tank into the machine base. To do that, raise the water tank lid and fill the tank with clear, chilly water. Then, insert the water tank into the machine base and push it down till it clicks into place.
3. Insert the detergent tank into the machine base. To do that, raise the detergent tank lid and fill the tank with Bissell Pet Professional Oxy method. Then, insert the detergent tank into the machine base and push it down till it clicks into place.
4. Connect the cleansing head to the deal with meeting. To do that, align the cleansing head with the deal with meeting and push it down till it clicks into place.
5. Connect the pet hair instrument to the cleansing head. To do that, align the pet hair instrument with the cleansing head and push it down till it clicks into place.
Filling the Clear Water Tank
To fill the clear water tank in your Bissell Proheat Pet Turbo, comply with these steps:
1. Preparation
Earlier than filling the tank, be certain that the machine is unplugged and the facility wire is disconnected from the outlet. Find the clear water tank on the again of the machine, which is often marked with a blue or clear lid.
2. Eradicating the Fill Cap
The fill cap is positioned on the highest of the clear water tank. To take away it, twist it counterclockwise till it pops open. Some fashions might have a latch that you should launch earlier than twisting.
3. Filling the Tank
Insert the top of your water hose or a pitcher into the fill opening. Fill the tank with sizzling water (140-160°F/60-71°C) to the “Max” fill line. Don’t overfill the tank.
4. Cleansing System
Add the required quantity of Bissell cleansing method to the water in response to the directions on the method bottle. Utilizing an excessive amount of method may cause the machine to foam excessively.
5. Changing the Fill Cap
As soon as the tank is crammed, screw the fill cap again onto the tank by twisting it clockwise till it’s securely tightened. Be certain that the cap just isn’t free, as this will trigger water to leak throughout operation.
Including the Cleansing Answer
Comply with these detailed steps to successfully add the cleansing answer to your Bissell Proheat Pet Turbo:
1. Fill the Clear Water Tank
Take away the Clear Water Tank from the machine and fill it with clear, sizzling faucet water as much as the “Max” fill line.
2. Measure the Cleansing Answer
Discuss with the cleansing directions offered together with your Bissell cleansing answer. Measure the advisable quantity of cleansing answer (usually 1-2 ounces) into the small cup offered.
3. Pour the Cleansing Answer into the System Tank
Take away the System Tank from the machine. Find the opening on the highest and pour the measured cleansing answer into the tank. Change the System Tank.
Extra Ideas:
- Use the cleansing answer particularly formulated for Bissell Proheat Pet Turbo.
- Don’t use vinegar or different cleansing brokers as they could harm the machine.
- By no means exceed the advisable quantity of cleansing answer, as it might trigger extreme foaming.
- Use a spoon or scoop to keep away from pouring an excessive amount of answer into the System Tank.
- Hold the cleansing answer out of attain of youngsters and pets.
After getting added the cleansing answer, you possibly can proceed to the subsequent step of cleansing your carpets or different surfaces.
| Step | Motion |
|---|---|
| 1 | Take away the Clear Water Tank. |
| 2 | Fill the tank with clear, sizzling faucet water. |
| 3 | Measure and add the cleansing answer to the System Tank. |
| 4 | Change the System Tank. |
Selecting the Appropriate Cleansing Mode
The Bissell Proheat Pet Turbo provides three cleansing modes to accommodate various kinds of messes and surfaces.
Categorical Clear Mode
This mode is good for fast cleanups or touch-ups. It makes use of much less water and detergent, making it much less prone to saturate carpets or depart a residue.
Deep Clear Mode
This mode offers a complete clear, utilizing extra water and detergent. It successfully removes grime, dander, and odors, leaving your carpets feeling refreshed and rejuvenated.
Rinse Solely Mode
This mode lets you rinse your carpets with out making use of any detergent. It is useful for eradicating residual detergent or pet urine stains.
| Cleansing Mode | Beneficial Use | Water and Detergent Utilization |
|---|---|---|
| Categorical Clear Mode | Fast cleanups, touch-ups | Much less water and detergent |
| Deep Clear Mode | Complete clear | Extra water and detergent |
| Rinse Solely Mode | Eradicating residual detergent or pet urine stains | No detergent |
Attaching the Cleansing Instruments
Attaching the cleansing instruments is important for getting probably the most out of your Bissell Proheat Pet Turbo. Here is a step-by-step information that can assist you do it accurately:
1. Connect the Carpet Cleansing Instrument
Align the carpet cleansing instrument with the bottom of the machine. Slide the instrument onto the bottom till it snaps into place.
2. Connect the Upholstery Cleansing Instrument
Insert the upholstery cleansing instrument into the designated port on the entrance of the machine. Push it in till it locks in place.
3. Connect the Naked Ground Cleansing Instrument
Slide the naked ground cleansing instrument onto the bottom of the machine. Be certain that the instrument is totally seated and safe.
4. Connect the Crevice Instrument
Insert the crevice instrument into the small opening on the entrance of the machine. Be certain that it’s securely connected.
5. Attaching the Stair Instrument (Optionally available)
The stair instrument just isn’t included with all Bissell Proheat Pet Turbo fashions. In case your mannequin comes with it, comply with these steps:
| Step | Description |
|---|---|
| 1. | Join the stair instrument to the extension wand. |
| 2. | Insert the extension wand into the designated port on the entrance of the machine. |
| 3. | Be certain that all connections are safe. |
Working the Bissell Proheat Pet Turbo
Utilizing the Bissell Proheat Pet Turbo is designed to be user-friendly, this is a step-by-step information that can assist you get began:
1. Fill the Clear Water Tank
Take away the clear water tank and fill it with sizzling faucet water to the designated line. Don’t use boiling water.
2. Add Cleansing Answer
Pour the advisable quantity of Bissell Pet Professional Oxy cleansing answer into the tank.
3. Connect the Upholstery Instrument (Optionally available)
For those who’re cleansing furnishings, connect the upholstery instrument to the top of the hose.
4. Choose the Floor Setting
Select the suitable floor setting for the realm you are cleansing: Onerous Ground, Carpet, or Upholstery.
5. Activate the Machine
Plug within the machine and press the facility button to begin it up.
6. Cleansing with the Proheat Pet Turbo
Slowly transfer the machine backwards and forwards over the floor you are cleansing. The machine will routinely dispense the cleansing answer and extract the grime. Repeat the method till the floor is clear and dry to the contact.
| Floor | Cleansing Methodology |
|---|---|
| Onerous Ground | Use the Onerous Ground brush head and make “S” motions throughout the floor. |
| Carpet | Use the Carpet brush head and make sluggish, overlapping passes over the realm. |
| Upholstery | Connect the Upholstery instrument and use sluggish, light strokes on the material. Keep away from over-saturating. |
Cleansing the Pet Turbo Brush Roll
The Pet Turbo Brush Roll is an elective attachment for the Bissell Proheat Pet Turbo, designed particularly for eradicating pet hair and particles from carpets and fabric. To make sure optimum efficiency, it is essential to wash the comb roll often.
Comply with these steps to wash the Pet Turbo Brush Roll:
1. Unclip the Brush Roll
Find the 2 latches on the aspect of the vacuum cleaner. Press the latches concurrently to launch the comb roll.
2. Take away the Brush Roll
Pull the comb roll straight out of the cleaner.
3. Examine the Brush Roll
Look at the comb roll for any seen particles, resembling pet hair, grime, or carpet fibers.
4. Take away Particles by Hand
Use your fingers or a pair of scissors to take away any free particles from the comb roll.
5. Rinse the Brush Roll
Maintain the comb roll underneath heat operating water, utilizing your fingers to softly take away any remaining particles.
6. Use a Cleansing Answer
If needed, apply a small quantity of light dish cleaning soap or upholstery cleaner to a moist fabric and wipe down the comb roll.
7. Rinse and Dry the Brush Roll Completely
Completely rinse the comb roll with clear water to take away any residual cleansing answer. Permit it to air dry fully earlier than reinstalling it.
| Cleansing Frequency | Beneficial Utilization |
|---|---|
| Each day | For households with pets that shed closely |
| Weekly | For households with average pet shedding |
| Month-to-month | For households with minimal pet shedding |
Emptying the Soiled Water Tank
After cleansing, it is essential to empty the soiled water tank to stop odors and keep the vacuum’s optimum efficiency.
-
Unplug the Bissell Proheat Pet Turbo from the facility outlet.
-
Find the soiled water tank, usually located on the entrance or again of the machine.
-
Firmly grasp the tank’s deal with and pull it straight as much as detach it from the vacuum.
-
Carry the tank to a sink or designated disposal space.
-
Take away the rubber stopper from the underside of the tank.
-
Pour the soiled water into the sink or disposal system.
-
Use clear water to rinse the tank completely.
-
Reinstall the rubber stopper firmly into the underside of the tank.
-
Reattach the soiled water tank to the vacuum by aligning it with the designated slot and pushing it down till it clicks into place.
Cleansing the Drain Nozzle
The drain nozzle is positioned on the underside of the machine. You will need to clear the drain nozzle often to stop clogs. To scrub the drain nozzle, comply with these steps:
1. Unplug the machine from {the electrical} outlet.
2. Take away the water tank from the machine.
3. Flip the machine the wrong way up.
4. Find the drain nozzle.
5. Use a small brush or a toothpick to take away any particles from the drain nozzle.
6. Rinse the drain nozzle with clear water.
7. Reattach the water tank to the machine.
8. Plug the machine again into {the electrical} outlet.
9. To scrub the drain nozzle completely, you need to use a mix of sizzling water and white vinegar. Pour the combination into the drain nozzle and let it sit for 10 minutes. Then, use a small brush or a toothpick to take away any remaining particles. Rinse the drain nozzle with clear water.Troubleshooting Frequent Points
1. My Bissell Proheat Pet Turbo just isn’t working
In case your Bissell Proheat Pet Turbo just isn’t working, there are some things you possibly can verify.
- **Is the facility wire plugged in?** Guarantee that the facility wire is securely plugged into an outlet and that the outlet is working.
- **Is the water tank empty?** If the water tank is empty, the machine will be unable to provide steam.
- **Are the filters soiled?** If the filters are soiled, they will prohibit the airflow and stop the machine from working correctly.
- **Is the comb roll jammed?** If the comb roll is jammed, it might forestall the machine from transferring ahead.
- **Is the belt damaged?** If the belt is damaged, the machine will be unable to rotate the comb roll.
2. My Bissell Proheat Pet Turbo is leaking water
In case your Bissell Proheat Pet Turbo is leaking water, there are some things you possibly can verify.
- **Is the water tank overfilled?** If the water tank is overfilled, water can leak out of the highest of the machine.
- **Is the water tank lid not correctly sealed?** If the water tank lid just isn’t correctly sealed, water can leak out of the perimeters of the machine.
- **Is the hose cracked or broken?** If the hose is cracked or broken, water can leak out of the hose.
- **Is the pump leaking water?** If the pump is leaking water, it can should be changed.
3. My Bissell Proheat Pet Turbo just isn’t vibrating
In case your Bissell Proheat Pet Turbo just isn’t vibrating, there are some things you possibly can verify.
- **Is the vibration mode turned on?** Guarantee that the vibration mode is turned on within the management panel.
- **Is the comb roll vibrating?** Test to see if the comb roll is vibrating. If it isn’t, the motor might should be changed.
- **Is the belt damaged?** If the belt is damaged, the motor will be unable to rotate the comb roll.
4. My Bissell Proheat Pet Turbo just isn’t suctioning correctly
In case your Bissell Proheat Pet Turbo just isn’t suctioning correctly, there are some things you possibly can verify.
- **Is the grime tank full?** If the grime tank is full, it might prohibit the airflow and stop the machine from suctioning correctly.
- **Is the filter soiled?** If the filter is soiled, it might prohibit the airflow and stop the machine from suctioning correctly.
- **Is the hose clogged?** If the hose is clogged, it might prohibit the airflow and stop the machine from suctioning correctly.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate suction.
5. My Bissell Proheat Pet Turbo just isn’t heating up
In case your Bissell Proheat Pet Turbo just isn’t heating up, there are some things you possibly can verify.
- **Is the water tank empty?** If the water tank is empty, the machine will be unable to provide steam.
- **Is the heater component clogged?** If the heater component is clogged, it will be unable to warmth the water.
- **Is the thermostat faulty?** If the thermostat is flawed, it will be unable to manage the temperature of the water.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate warmth.
6. My Bissell Proheat Pet Turbo is making a wierd noise
In case your Bissell Proheat Pet Turbo is making a wierd noise, there are some things you possibly can verify.
- **Is the comb roll hitting one thing?** If the comb roll is hitting one thing, it might make a rattling noise.
- **Is the belt free?** If the belt is free, it might make a squealing noise.
- **Is the pump not working correctly?** If the pump just isn’t working correctly, it might make a buzzing noise.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it might make a grinding noise.
7. My Bissell Proheat Pet Turbo just isn’t choosing up grime
In case your Bissell Proheat Pet Turbo just isn’t choosing up grime, there are some things you possibly can verify.
- **Is the comb roll rotating?** If the comb roll just isn’t rotating, it will be unable to choose up grime.
- **Is the suction hose clogged?** If the suction hose is clogged, it will be unable to choose up grime.
- **Is the filter soiled?** If the filter is soiled, it might prohibit the airflow and stop the machine from choosing up grime.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to generate suction.
8. My Bissell Proheat Pet Turbo is leaving streaks on my carpet
In case your Bissell Proheat Pet Turbo is leaving streaks in your carpet, there are some things you possibly can verify.
- **Is the water tank soiled?** If the water tank is soiled, it might depart streaks in your carpet.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will be unable to dispense detergent, which might depart streaks in your carpet.
- **Is the nozzle clogged?** If the nozzle is clogged, it might prohibit the circulation of water and detergent, which might depart streaks in your carpet.
- **Is the comb roll soiled?** If the comb roll is soiled, it might depart streaks in your carpet.
9. My Bissell Proheat Pet Turbo just isn’t shelling out detergent
In case your Bissell Proheat Pet Turbo just isn’t shelling out detergent, there are some things you possibly can verify.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will be unable to dispense detergent.
- **Is the detergent dispenser clogged?** If the detergent dispenser is clogged, the detergent will be unable to circulation out of the machine.
- **Is the detergent hose clogged?** If the detergent hose is clogged, the detergent will be unable to circulation out of the machine.
- **Is the motor not working correctly?** If the motor just isn’t working correctly, it will be unable to dispense detergent.
10. My Bissell Proheat Pet Turbo just isn’t turning off
In case your Bissell Proheat Pet Turbo just isn’t turning off, there are some things you possibly can verify.
Potential Trigger Answer The facility wire just isn’t plugged in Plug the facility wire into an outlet The facility swap just isn’t turned off Flip the facility swap to the off place The motor is seized Have the motor changed by a certified technician The circuit breaker has tripped Reset the circuit breaker Bissell Proheat Pet Turbo: A Complete Information to Its Utilization
The Bissell Proheat Pet Turbo is a strong cleansing machine designed to handle the precise cleansing challenges confronted by pet homeowners. Its superior options and modern design make it a precious asset for properties with furry companions. Here is a step-by-step information on easy methods to successfully use the Bissell Proheat Pet Turbo:
- Put together the Answer: Fill the clear water tank with the offered Bissell method. Keep away from utilizing family detergents or different chemical compounds, as they will harm the machine.
- Connect the Instrument: Choose the suitable cleansing instrument to your floor (e.g., brush roll for carpets, upholstery instrument for furnishings). Safe it to the machine’s nozzle.
- Check in an Inconspicuous Space: Earlier than cleansing a big space, check the answer and cleansing instrument on an not easily seen spot to make sure compatibility.
- Clear: Slowly transfer the machine over the floor, urgent the set off to launch the cleansing answer. Keep away from over-saturating the realm.
- Rinse: After cleansing, swap to the clear water setting and rinse the realm completely. This may extract the soiled water and answer.
- Empty the Soiled Water Tank: As soon as the rinse cycle is full, empty the soiled water tank and refill it with clear water for the subsequent cleansing session.
Folks Additionally Ask About Bissell Proheat Pet Turbo How To Use
How Do I Resolve a Clogged Nozzzle?
If the nozzle turns into clogged, comply with these steps to unclog it:
- Flip off and unplug the machine.
- Take away the cleansing instrument from the nozzle.
- Use a paperclip or toothpick to softly take away any particles or hair that could be blocking the nozzle holes.
- Reattach the cleansing instrument and check the nozzle by urgent the set off.
Can I Use the Bissell Proheat Pet Turbo on Onerous Flooring?
Sure, you need to use the Bissell Proheat Pet Turbo on exhausting flooring. Nonetheless, it is advisable to make use of the exhausting ground instrument to keep away from scratching or damaging the floor.
How Usually Ought to I Clear My Bissell Proheat Pet Turbo?
For optimum efficiency, it is advisable to wash the Bissell Proheat Pet Turbo after every use. This entails emptying the soiled water tank, refilling the clear water tank, and rinsing the machine completely by following the steps outlined above.
